The working cylinder adopts a round design, and the forming chamber achieves the sealing effect at the hydraulic cylinder level. Z resolution of up to 5um;
The forming chamber, the main body and the working cylinder are integrally formed. Stainless steel, aluminum alloy, titanium alloy, cobalt chromium alloy and other metal materials can be directly formed.
Scientific research, teaching and research and development of new materials;
Aerospace, high-end complex mold manufacturing, digital medical.
YLM-300 technical parameters
Equipment model YLM -300
The forming space is 300mm in the horizontal direction and 300mm in the height direction
Minimum spot size 70UM
The laser power 500W, single-mode fiber laser, the long-term power fluctuation of less than 4%
Software for forming control software Zflash (Yongnian laser independent development)
The working cylinder adopts a round design, and the forming chamber achieves the sealing effect of the hydraulic cylinder level, which can effectively prevent leakage of metal powder, improve the service life of the lifting system, and simultaneously reduce the powder loss and pollution;
The forming chamber, the main body and the working cylinder are integrally formed, and the position accuracy is guaranteed by the precision machining center. The accuracy of the Z and the accuracy of the powder feeding are greatly improved, and the minimum resolution of Z is up to 5um;
The sealed powder feeding device in the isolated atmosphere will not add oxygen to the metal powder during the forming process, and will be suitable for some active metal materials of Yu Chengxing
A controlled quantitative powder feeding structure is adopted to replace the traditional two way powder feeding mode, and the powder feed rate can be adjusted in real time through the parameters, so as to greatly improve the material utilization rate.